==========================================================================
ClientMate for Linux 
==========================================================================

1.1 Operating System Supported
--------------------------------------------------------------------------
    * Linux 2.x or Later

1.2 Features
--------------------------------------------------------------------------
    * ClientMate is a utility for connecting to NetAgent. 
      This utility is for the Linux platform. When the ClientMate get
      the power failure signal from  NetAgent. 
      The ClientMate will shutdown the system gracefully. When the
      hardware installation of the NetAgent has been completed, you could 
      install the ClientMate on any of the Linux system on the network. When the
      ClientMate detects the AC Fail, Battery Low, the NetAgent, 
      it will shutdown the system. Please check the operation description here below.

1.3 Operating System Requirements
---------------------------------------------------------------------
    * linux operating system running on the computer.
    * An SNMP Agent that monitors a network UPS.

1.4 Simple Installation
---------------------------------------------------------------------
    * Hardware Installation
      1.An SNMP Agent that is connected to the smart UPS or Contact Closure UPS.
      2.a linux client pc (kernel version 2.0 or later)

    * Software Installation
       1.Log in as the super-user.
       2.Copy file into the system. Example, copy into directory '/tmp'.
	    # mount /dev/cdrom /mnt/cdrom
	    # cd /mnt/cdrom
	    # cp clientmate.tar.gz  install.dat /tmp	    	    	
       3.Change directory into '/tmp':
            # cd /tmp
            # chmod 755 install.dat
       4.Execute the installation program:
         # ./install.dat
       5.Select the target system from the menu, and configuration
         the ClientMate for Linux ,the installation program will launch the
         ClientMate for Linux daemon process automatically.
       Note:If there is no network connection in your system, please
            let your dealer know what kind of media you could use to
            copy files into your system.

     * How to give command
       1.Start ClientMate for Linux daemon process
         /etc/clientmate/clientmate start
       2.Stop ClientMate for Linux daemon process
         /etc/clientmate/clientmate stop
       3.Configure the parameters:
         /etc/clientmate/clientmate config
       4.Monitor the UPS status:
         /etc/clientmate/clientmate status

1.5 TECHNICAL SUPPORT
-------------------------------------------------------------------------
    ClientMate for Linux is developed by Mega System Technologies, Inc.If there is any
    question or comment about this product,please be free to contact us.

    Mega System Technologies, Inc.
    Tel: +886-2-87922060
    Fax: +886-2-87922066
    CompuServe ID#: 101400,362
    E-MAIL: service@megatec.com.tw
    FTP: ftp://ftp.megatec.com.tw
    WWW: http://www.megatec.com.tw
    Copyright 1996~2004 by: Mega System Technologies, Inc.